Pressing Instructions

How To apply our LOW HEAT transfers:

1.No Teflon Sheets, covers, or pillows.
EVER They Dissipate the heat too much
resulting in poorly applied transfers.

2. Calibrate your heat press- a heat gun
is a great way to make sure your heat press
is accurate.

3.Pressure, Pressure, Pressure!- Making sure
your heat press is giving lots of and
EVEN pressure is very important!

4. Set your heat press to 325-350 degrees
Fahrenheit- it depends on YOUR HEAT PRESS

5. Make sure your pressure is set to High
(8-9 manual. 60PSI automatic)

6. Press Your Transfer for 10 seconds-(side note-
I personally fold up a telfon sheet to a small
square and put it in between my hand and the
top of the heat press and press while the lid
is closed on all parts, corners included, of
the heat press to ensure I am getting pressure
on every part of the transfer.. I'm sure
an oven mit would work too)

7. Open The Press and hot peel your transfer
How To apply our HIGH HEAT transfers:

1.No Teflon Sheets, covers, or pillows.
EVER They Dissipate the heat too much
resulting in poorly applied transfers.

2. Calibrate your heat press- a heat gun
is a great way to make sure your heat press
is accurate.

3.Pressure, Pressure, Pressure!- Making sure
your heat press is giving lots of and
EVEN pressure is very important!

4. Set your heat press to 350-375 Degrees

Fahrenheit. 


5. Make sure your pressure is set to High
(8-9 manual. 60PSI automatic)

6. Press Your Transfer for 10 seconds-(side note-
I personally fold up a telfon sheet to a small
square and put it in between my hand and the
top of the heat press and press while the lid
is closed on all parts, corners included, of
the heat press to ensure I am getting pressure
on every part of the transfer.. I'm sure
an oven mit would work too)

7. Open The Press and hot peel your transfer

These are instructions from the Manufacturer and
have worked for me personally! You have to figure out your press and what works best for it. Pressure and heat! There are no refunds or exchanges for operator error!  

Please let me know if you have any questions!
Thank you for supporting us, we appreciate your business!
-ABI Designs